AC DC-Back in Black tone

AC DC-Back in Black tone​

Preset name: AC DC

Comments:
Bridge pickup,i hope you like it!!!

Effects chain:

Spoiler: Preset settings

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"

"Sens" = 41​

"Mode" = Soft​

Effect: "Compressor" (Dynamics / Filter), active - "yes"

"Sense" = 41​

"Level" = 41​

Effect: "T-Scream" (Overdrive / Distortion), active - "yes"

"Drive" = 52​

"Tone" = 56​

"Level" = 69​

Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"

"160 Hz" = 1​

"400 Hz" = 2​

"800 Hz" = 4​

"1.6 kHz" = 5​

"3.2 kHz" = 3​

"6.4 kHz" = 2​

"12 kHz" = 1​

"Level (dB)" = 4​

Effect: "Ms Plexi" (Amp simulators), active - "yes"

"Gain" = 50​

"Bass" = 40​

"Middle" = 60​

"Treble" = 42​

"Presence" = 32​

"Master" = 100​

"Output" = 50​

"Level (dB)" = 9​

Effect: "IR Processor" (Dynamics / Filter), active - "yes"

"IR" = marshall-2_impact​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

Effect: "ModDly" (Delay), active - "yes"

"Time" = 521​

"Feedback" = 25​

"Tone" = 56​

"Speed" = 1.6​

"Mix" = 61​

Effect: "HD Room Rvb" (Reverb), active - "yes"

"Time" = 3.9​

"PreLPF" = 77​

"PreDelay" = 104​

"HiDamp" = 65​

"LoGain" = -3.5​

"Mix" = 33​

Note: You will need to download and install the ToneLib-GFX software to use the preset.

 

Xkappa thank you!!

 

thank you puppetmancer!!!

 

the noise depends on your soundcard and your guitar my friend,
go to the ''noise reducer''of the preset and tweak a little the ''sens''knob .
It will be ok.
thanks for the respond!!!

 

thank you Summers!!!

 

Thank you Tobias!!!

 

thank you Alexey Borovkov!!!

 

thanks leonzajgar!!!

 

thanks Yurij!!!

 

thanks Yurij!!!

 

thank you shock1985pl!!!

 

thank you Sergejs Matvejenkovs!!!

 

thank you Evil!!!

 

thank you vasia!!!

 

thanks nikkel!!!

 

thanks Pierbert!!!

 

thanks tommoh!!!

 

thanks SILENCER212415!!!

 

thanks NeitanExp!!!