HOMESOLO 2

Discussion in 'Zoom G1on/G1Xon' started by Kovács László, Feb 22, 2021.

  1. HOMESOLO 2
    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: HOME SOLO
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    HOMESOLO 2 , almost the same . Recorded with vintage singlicoil in bridge position. Sound from 0:26.


    Effect: "ZNR" (Dynamics / Filter), active - "yes"
    "THRSH" = 13
    "DETCT" = GtrIn
    "Level" = 118

    Effect: "T Scream" (Overdrive / Distortion), active - "yes"
    "Gain" = 27
    "Tone" = 56
    "Level" = 115

    Effect: "ALIEN" (Amp simulators), active - "yes"
    "Gain" = 44
    "Tube" = 33
    "Level" = 59
    "Trebl" = 39
    "Middl" = 43
    "Bass" = 29
    "Prese" = 35
    "CAB" = DZ DRIVE 4x12
    "OUT" = LINE

    Effect: "StereoDly" (Delay / Reverb), active - "yes"
    "TimeL" = 513
    "TimeR" = 325
    "Mix" = 79
    "LchFB" = 20
    "RchFB" = 71
    "Level" = 101
    "LchLv" = 79
    "RchLv" = 31
    "Tail" = On

    Effect: "ParaEQ" (Dynamics / Filter), active - "yes"
    "Freq1" = 3.2kHz
    "Q1" = 0.5
    "Gain1" = 10
    "Freq2" = 8.0kHz
    "Q2" = 1
    "Gain2" = -10
    "Level" = 100
    Patch Volume: 110


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Dr.TPyTEHb, Mog and Togga like this.
  2. Togga

    Togga New Member

    Well balanced Lead,sounds Great on my tele.
    well done my friend
     
  3. Thankyou!