Tonelib GFX Standalone problem

Same happens to me. The input signal from my U-Phoria interface is detected, but the standalone version has no audio at all for me. All the ASIO settings are correct, all my hardware works correctly.

 

I have Steinberg UR22mkII, suppose it's a same or similar?
Anyway, try play with knob OUTPUT on Steinberg device.
Also, try connect guitar on both channells, I have issues with interface, can hear guitar only on input 2 with Hi-Z activated...

Hope I help...

 

Same problem. I can hear it using Reaper, but nothing on stand alone mode

 

You've obviously got problems with the very basics of connecting your axe to any equipment… I won't even explain what's wrong, and why the interface is totally okay. Google it.

 

Good day,

No issues here at all...three different systems, three different interfaces...

 

That's because you've read about what Hi-Z means in before to start either using your interfaces or complaining about the interface not working with an instrument plugged in wrong.

 

I use GFX with U-Phoria UMC22 interface as standalone with no DAW, and all the Audio settings show sound working. Sometimes my guitar sounds great, but most often does not work. Anyone have any advice to make it work more consistently? I'm ready to pay for it, but if it cannot work consistently, I'm bummed. Any advice would be appreciated. Thank you!!

 

Same with me.
I'm using a M-Audio Fast Track Pro-Interface. Since I updated the standalone player doesn't work anymore.
There's an input signal showing when strumming the guitar and when I click the "Test output"-button I can hear a tone, but no guitar sound...
The plug-in still works.

 

Update: I just tried again and plugged my guitar in channel 1 of my Fast Track Pro interface: It works!
On channel 2 it's still not working (input signal is there but no output) - strange...

 

buongiorno sto usando come interfaccia Focusrite solo praticamente non riesco a gestire volume base e chitarra man mano che suono la chitarra sparisce ed il potenziometro no funziona più ho fatto diversi settaggi ma niente aiuto!!!

 

You are right! Thank you.

(I have the steinberg urc22. In standalone mode and the "yamaha steinberg usb audio" only works with line 1 input. On the other hand, by using the "generic low latency asio driver" works well with the line 2)