My aproach to DJENT Preset name: DejTNTs Comments: Soo this is it... I use A washburn guitar with Seymour Duncan Hotrail, i hope you enjoy it... For Better result add some extra adjustment With EQ and use a VST compresor before this chain... Effects chain: Spoiler: Preset settings Effect: "Noise Gate" (Dynamics / Filter), active - "no" "Detect" = Gtr In"Mode" = Manual"Depth" = 50"Threshold" = 50"Attack" = 0"Hold" = 5"Decay" = 250 Effect: "Compressor" (Dynamics / Filter), active - "yes" "Sense" = 70"Level" = 50 Effect: "Cent OD" (Overdrive / Distortion), active - "yes" "Drive" = 38"Tone" = 76"Level" = 38 Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 55"Mode" = Hard Effect: "Mesa Rect" (Amp simulators), active - "yes" "Gain" = 25"Bass" = 70"Middle" = 75"Treble" = 59"Presence" = 62"Master" = 50"Output" = 50"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = PeripheryPeriphery"Low Cut (Hz)" = 100"Hi Cut (kHz)" = 9.0"Mix" = 100"Level (dB)" = 0 Effect: "Studio EQ" (Dynamics / Filter), active - "yes" "31 Hz" = -2"62 Hz" = -5"125 Hz" = 0"250 Hz" = 2"500 Hz" = 0"1 kHz" = 1"2 kHz" = 0"4 kHz" = 1"8 kHz" = 3"16 kHz" = 0"above 16 kHz" = 0"Level (dB)" = 0 Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" "160 Hz" = -2"400 Hz" = 0"800 Hz" = 0"1.6 kHz" = 2"3.2 kHz" = 2"6.4 kHz" = 1"12 kHz" = 0"Level (dB)" = 0 Note: You will need to download and install the ToneLib-GFX software to use the preset.
Compressor shouldn't be used before amp overdrive stage. This kill all the dynamics, thus the ability to vary sound between “djenty” and “regular”. That's the point of plugging into tube amps and tube simulations.
Men thanks a lot for your review... but I made that tone with that wasburn Lyon (with a tons of troubles) and in that moment work for me.Recently I bought a new guitar and is what you say... but thanks.im gonna tweak this in any moment.