JOHN FRUSCIANTE CLEAN TONE

Discussion in 'Zoom G1on/G1Xon' started by gabrielito, Dec 27, 2019.

  1. gabrielito

    gabrielito New Member

    JOHN FRUSCIANTE CLEAN TONE

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: RHCP
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    Works for all clean song of the Chili Peppers
    Chorus for outro of Under the Bridge
    Wah is extra because I like it


    Effect: "WAH100" (Pedal), active - "no"
    "Freq" = 0
    "Depth" = 100
    "Level" = 100

    Effect: "FD COMBO" (Amp simulators), active - "yes"
    "Gain" = 19
    "Tube" = 22
    "Level" = 86
    "Trebl" = 32
    "Middl" = 53
    "Bass" = 47
    "Prese" = 52
    "CAB" = FD COMBO 2x12
    "OUT" = STACK POWER AMP

    Effect: "160 Comp" (Dynamics / Filter), active - "yes"
    "THRSH" = -24
    "Ratio" = 8.6
    "Gain" = 11
    "Knee" = Hard
    "Level" = 100

    Effect: "Booster" (Overdrive / Distortion), active - "no"
    "Gain" = 84
    "Tone" = 50
    "Level" = 100

    Effect: "Chorus" (Modulation / Sfx), active - "no"
    "Depth" = 40
    "Rate" = 25
    "Mix" = 50
    "Tone" = 7
    "Level" = 100

    Patch Volume: 70


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    neeraj joshi likes this.
  2. neeraj joshi

    neeraj joshi New Member

    Thanks!
     
  3. LuisFer73

    LuisFer73 New Member

    Hi, If a change the out to "line", it will work?
     
  4. Dlaniger

    Dlaniger New Member

    Yes it will. The out just changes the output level and you select the appropriate one dpending if you are going to an amplifier or direct into a desk or recording.
     
    LuisFer73 likes this.