Mertal Tone Truss Preset name: Metal Tone Truss Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 36"Level" = 41} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 67"Tone" = 62"Level" = 51} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 22"Bass" = 43"Middle" = 67"Treble" = 65"Presence" = 55"Master" = 59"Level (dB)" = 1} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Mesa_02"Low Cut (Hz)" = 120"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes" { "Speed" = 2.9"Depth" = 31"Center" = 1.0"Mode" = Stereo} Effect: "Hall Rvb" (Reverberation), active - "yes" { "Time" = 3.9"PreDelay" = 0"LoDamp" = 0"HiDamp" = 8"Mix" = 36} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 7.4"PreDelay" = 32"LoDamp" = 0"HiDamp" = 12"Mix" = 58} Effect: "ModDly" (Delay), active - "yes" { "Time" = 505"Feedback" = 32"Tone" = 58"Speed" = 1.6"Mix" = 45} Effect: "AnalogDly" (Delay), active - "yes" { "Time" = 692"Feedback" = 39"Tone" = 65"Mix" = 65} Note: You will need to download and install the ToneLib-GFX software to use the preset.
