super palm-mute Preset name: super palm-mute Effects chain: Spoiler: Preset settings Effect: "Splitter" (Dynamics / Filter), active - "yes" { "A-Bypass" = Off"A-Pan" = -60"A-Level" = 59"B-Bypass" = Off"B-Pan" = 60"B-Level" = 56 'A' branch: { Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Single->Humbacker"Tone" = 100} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Soft} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 22"Tone" = 50"Level" = 79} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 51"Bass" = 51"Middle" = 81"Treble" = 60"Presence" = 72"Master" = 51"Level (dB)" = 0} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Marshall 1960A (4x12")"Mic Position" = Center"Mic Distance" = Near"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 4} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = englv30higherpres-01"Low Cut (Hz)" = 156"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 1x12" Blue Bell"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "no" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 40} Effect: "Noise Gate" (Dynamics / Filter), active - "yes" { "Mode" = Manual"Depth" = 50"Threshold" = 100"Attack" = 0"Hold" = 5"Decay" = 250} } 'B' branch: { Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 78"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 38"Level" = 38} Effect: "Metal DS" (Overdrive / Distortion), active - "yes" { "Dist" = 48"Bass" = 46"Middle" = 65"Treble" = 49"Level" = 60} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 66"Bass" = 38"Middle" = 81"Treble" = 62"Presence" = 59"Master" = 66"Level (dB)" = 1} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = rectifier sm57_impact"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 1} Effect: "Noise Gate" (Dynamics / Filter), active - "yes" { "Mode" = Manual"Depth" = 50"Threshold" = 100"Attack" = 0"Hold" = 5"Decay" = 250} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.
