Fear Factory Industrial Preset name: Industrial Metal Preset Comments: For that Industrial Metal Thickness. Comparible to Fear Factory Effects chain: Spoiler: Preset settings Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 65"Tone" = 70"Level" = 100} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 81"Mode" = Hard} Effect: "Splitter" (Dynamics / Filter), active - "yes" { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "Dz Herbert" (Amp simulators), active - "yes" { "Gain" = 35"Bass" = 65"Middle" = 35"Treble" = 80"Presence" = 75"Master" = 70"Level (dB)" = 2} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = ACE EV 5153ST 1a"Low Cut (Hz)" = 58"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 1} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -2"62 Hz" = -2"125 Hz" = 4"250 Hz" = -2"500 Hz" = -4"1 kHz" = 4"2 kHz" = 4"4 kHz" = 4"8 kHz" = 4"16 kHz" = 1"Level (dB)" = 0} } 'B' branch: { Effect: "Ms JCM2000" (Amp simulators), active - "yes" { "Gain" = 35"Bass" = 65"Middle" = 25"Treble" = 80"Presence" = 85"Master" = 70"Level (dB)" = 2} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = ACE EV 5153ST 4b"Low Cut (Hz)" = 41"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 2} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -2"62 Hz" = -2"125 Hz" = 4"250 Hz" = -2"500 Hz" = -4"1 kHz" = 4"2 kHz" = 4"4 kHz" = 4"8 kHz" = 4"16 kHz" = 1"Level (dB)" = 0} } } Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 7.3"PreDelay" = 48"LoDamp" = 21"HiDamp" = 23"Mix" = 30} Note: You will need to download and install the ToneLib-GFX software to use the preset.
