Mesa Boogie Preset name: My Distortion Effects chain: Spoiler: Preset settings Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = -4"400 Hz" = -2"800 Hz" = 2"1.6 kHz" = 4"3.2 kHz" = 0"6.4 kHz" = 2"12 kHz" = 6"Level (dB)" = 0} Effect: "Noise Gate" (Dynamics / Filter), active - "yes" { "Mode" = Auto"Depth" = 50"Threshold" = 50"Attack" = 0"Hold" = 5"Decay" = 250} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 40"Bass" = 50"Middle" = 40"Treble" = 50"Presence" = 34"Master" = 100"Level (dB)" = 0} Effect: "Splitter" (Dynamics / Filter), active - "yes" { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "Splitter" (Dynamics / Filter), active - "yes" { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = MesaRectifierV30s-SM57-Cap-0in"Low Cut (Hz)" = 79"Hi Cut (kHz)" = 10.0"Mix" = 100"Level (dB)" = 2} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = MesaRectifierV30s-SM57-ConeEdge-3in"Low Cut (Hz)" = 160"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = -4} } } Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 316"Feedback" = 38"Tone" = 65"LoDamp" = 19"Mix" = 65} } 'B' branch: { Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = MesaRectifierV30s-KM84-Stereo-Room"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = -10} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 7.4"PreDelay" = 32"LoDamp" = 0"HiDamp" = 12"Mix" = 58} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.
