Crunch blues strat one

Discussion in 'ToneLib-GFX presets' started by truss van halen, Dec 14, 2020.

  1. truss van halen

    truss van halen Well-Known Member

    Crunch blues strat one​

    Preset name: Crunch blues strat

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 100​
    "Mode" = Hard​
    }
    ​

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 0​
    "Tone" = 40​
    "Level" = 79​
    }
    ​

    Effect: "Ms JTM45" (Amp simulators), active - "yes"
    {
    "Gain" = 74​
    "Bass" = 56​
    "Middle" = 63​
    "Treble" = 59​
    "Presence" = 50​
    "Master" = 64​
    "Level (dB)" = 6​
    }
    ​

    Effect: "Cab Sim" (Cabinets), active - "yes"
    {
    "Model" = 2x12" Silver Bell ​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Fender Deluxe Rev (1x12")​
    "Mic Position" = Middle​
    "Mic Distance" = Near​
    "Low Cut (Hz)" = 60​
    "Hi Cut (kHz)" = 20.0​
    "Mix" = 100​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 3.2​
    "Depth" = 51​
    "Center" = 6.4​
    "Mix" = 100​
    }
    ​

    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off​
    "A-Pan" = 0​
    "A-Level" = 55​
    "B-Bypass" = Off​
    "B-Pan" = 0​
    "B-Level" = 55​

    'A' branch:
    {

    Effect: "CrossDly" (Delay), active - "yes"
    {
    "Time" = 756​
    "Feedback" = 53​
    "Tone" = 80​
    "Sens" = 38​
    "Mix" = 43​
    }
    ​
    }
    'B' branch:
    {
    }
    ​
    }
    ​

    Effect: "Hall Rvb" (Reverberation), active - "yes"
    {
    "Time" = 9.4​
    "PreDelay" = 61​
    "LoDamp" = 49​
    "HiDamp" = 17​
    "Mix" = 44​
    }
    ​


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    ExE, Jack Disney, ian1134 and 2 others like this.
  2. Viktor Pomichal

    Viktor Pomichal New Member

    Hi,

    how can i use it for g1 four pedal? i can't add the file to the tonelib software.

    thank you for your answer!