Master of Puppets Preset name: Master Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 91"Mode" = Hard} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 65"A-Level" = 66"B-Bypass" = Off"B-Pan" = -65"B-Level" = 66 'A' branch: { Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Phase Out"Tone" = 50} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 24"Tone" = 71"Level" = 82} Effect: "Dz Herbert" (Amp simulators), active - "yes" { "Gain" = 50"Bass" = 50"Middle" = 0"Treble" = 73"Presence" = 50"Master" = 50"Level (dB)" = 7} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Puppet_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = -5"500 Hz" = -12"1 kHz" = -5"2 kHz" = 5"4 kHz" = 3"8 kHz" = 3"16 kHz" = 0"Level (dB)" = 0} } 'B' branch: { Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 32"Tone" = 71"Level" = 82} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 50"Bass" = 50"Middle" = 0"Treble" = 73"Presence" = 50"Master" = 50"Level (dB)" = 5} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Puppet_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "PhaseShift" (Modulation / Sfx), active - "yes" { "Shift" = 55"Mix" = 100} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = -5"500 Hz" = -12"1 kHz" = -5"2 kHz" = 5"4 kHz" = 3"8 kHz" = 3"16 kHz" = 0"Level (dB)" = 0} } } Effect: "ModDly" (Delay), active - "no" { "Time" = 804"Feedback" = 10"Tone" = 66"Speed" = 1.7"Mix" = 38} Effect: "Canyon Rvb" (Reverberation), active - "yes" { "Time" = 6.1"PreDelay" = 42"LoDamp" = 0"HiDamp" = 32"Mix" = 39} Note: You will need to download and install the ToneLib-GFX software to use the preset.