Bark At The Moon/Ozzy

Discussion in 'ToneLib-GFX presets' started by Tucker Stanley, Feb 5, 2023.

  1. Bark At The Moon/Ozzy​

    Preset name: Jake E Lee

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 65​
    "Mode" = Hard​
    }
    ​

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 74​
    "Tone" = 41​
    "Level" = 50​
    }
    ​

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off​
    "A-Pan" = 0​
    "A-Level" = 55​
    "B-Bypass" = Off​
    "B-Pan" = 0​
    "B-Level" = 55​
    "Width" = 0​

    'A' branch:
    {

    Effect: "Ms JCM800" (Amp simulators), active - "yes"
    {
    "Gain" = 70​
    "Bass" = 68​
    "Middle" = 45​
    "Treble" = 36​
    "Presence" = 29​
    "Master" = 55​
    "Level (dB)" = -3​
    }
    ​

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = Cab IR Sample4​
    "Low Cut (Hz)" = 125​
    "Hi Cut (kHz)" = 6.5​
    "Mix" = 100​
    "Level (dB)" = 3​
    }
    ​

    Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 0.7​
    "Depth" = 25​
    "Center" = 3.9​
    "Mode" = Stereo​
    }
    ​
    }
    'B' branch:
    {

    Effect: "Org Crush" (Amp simulators), active - "yes"
    {
    "Gain" = 56​
    "Bass" = 67​
    "Middle" = 55​
    "Treble" = 19​
    "Presence" = 35​
    "Master" = 55​
    "Level (dB)" = -2​
    }
    ​

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = Cab IR Sample4​
    "Low Cut (Hz)" = 175​
    "Hi Cut (kHz)" = 6.5​
    "Mix" = 100​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Cent OD" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 40​
    "Tone" = 76​
    "Level" = 38​
    }
    ​
    }
    ​
    }
    ​

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = -12​
    "62 Hz" = -14​
    "125 Hz" = 2​
    "250 Hz" = -5​
    "500 Hz" = -6​
    "1 kHz" = -4​
    "2 kHz" = 5​
    "4 kHz" = 5​
    "8 kHz" = -3​
    "16 kHz" = -11​
    "Level (dB)" = -1​
    }
    ​

    Effect: "HD Room Rvb" (Reverberation), active - "yes"
    {
    "Time" = 2.5​
    "PreLPF" = 0​
    "PreDelay" = 0​
    "HiDamp" = 100​
    "LoGain" = -12.0​
    "Mix" = 25​
    }
    ​


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: