Rustam Preset name: Driven Power Solo Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Soft} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 75"Tone" = 64"Level" = 100} Effect: "Vx Ac30Tb" (Amp simulators), active - "yes" { "Gain" = 70"Bass" = 61"Middle" = 36"Treble" = 67"Presence" = 66"Master" = 100"Level (dB)" = 0} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -100"A-Level" = 55"B-Bypass" = Off"B-Pan" = 100"B-Level" = 55"Width" = 36 'A' branch: { Effect: "Cab Sim" (Cabinets), active - "no" { "Model" = 2x12" Silver Bell "Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = 7"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = Note sync, 1/8 Dotted"Feedback" = 34"Tone" = 65"LoDamp" = 19"Mix" = 33} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 0"400 Hz" = 0"800 Hz" = 0"1.6 kHz" = 0"3.2 kHz" = 0"6.4 kHz" = -3"12 kHz" = 0"Level (dB)" = 0} } 'B' branch: { Effect: "Cab Sim" (Cabinets), active - "no" { "Model" = 1x12" Blue Bell"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = 15"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 19.5"Mix" = 100"Level (dB)" = 0} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = Note sync, 1/16 Dotted"Feedback" = 70"Tone" = 65"LoDamp" = 19"Mix" = 37} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 0"400 Hz" = 0"800 Hz" = 0"1.6 kHz" = 0"3.2 kHz" = 0"6.4 kHz" = -3"12 kHz" = 0"Level (dB)" = 0} } } Effect: "Bounce Rvb" (Reverberation), active - "yes" { "Time" = 2.7"PreDelay" = 32"LoDamp" = 16"HiDamp" = 26"Mix" = 30} Note: You will need to download and install the ToneLib-GFX software to use the preset.
