Megadeth - Rust In Peace

Megadeth - Rust In Peace​

Preset name: Rust in Peace

Effects chain:

Spoiler: Preset settings

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 60​

"Mode" = Hard​

}
​

Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
{

"Drive" = 0​

"Tone" = 100​

"Level" = 23​

}
​

Effect: "Mesa Rect" (Amp simulators), active - "yes"
{

"Gain" = 66​

"Bass" = 57​

"Middle" = 88​

"Treble" = 84​

"Presence" = 81​

"Master" = 30​

"Level (dB)" = 10​

}
​

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = -25​

"A-Level" = 55​

"B-Bypass" = Off​

"B-Pan" = 25​

"B-Level" = 55​

"Width" = 0​

'A' branch:
{

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = -25​

"A-Level" = 55​

"B-Bypass" = Off​

"B-Pan" = 25​

"B-Level" = 55​

"Width" = 0​

'A' branch:
{

Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = ASEM RECTO V30 L2​

"Low Cut (Hz)" = 70​

"Hi Cut (kHz)" = 10.0​

"Mix" = 100​

"Level (dB)" = 4​

}
​

}
'B' branch:
{

Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = MegadethHolyWars​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

}
​

}
​

}
​

}
'B' branch:
{

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = -25​

"A-Level" = 55​

"B-Bypass" = Off​

"B-Pan" = 25​

"B-Level" = 55​

"Width" = 0​

'A' branch:
{

Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = ASEM RECTO V30 L2​

"Low Cut (Hz)" = 70​

"Hi Cut (kHz)" = 10.0​

"Mix" = 100​

"Level (dB)" = 4​

}
​

}
'B' branch:
{

Effect: "IR Processor" (Cabinets), active - "yes"
{

"IR" = Rust in Peace - IR​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

}
​

}
​

}
​

}
​

}
​

Effect: "IR Processor" (Cabinets), active - "no"
{

"IR" = ASEM RECTO V30 L2​

"Low Cut (Hz)" = 70​

"Hi Cut (kHz)" = 10.0​

"Mix" = 100​

"Level (dB)" = 4​

}
​

Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
{

"160 Hz" = 1​

"400 Hz" = -1​

"800 Hz" = 0​

"1.6 kHz" = 0​

"3.2 kHz" = 0​

"6.4 kHz" = 2​

"12 kHz" = -3​

"Level (dB)" = 0​

}
​

Effect: "Garage Rvb" (Reverberation), active - "yes"
{

"Time" = 5.2​

"PreDelay" = 46​

"LoDamp" = 0​

"HiDamp" = 30​

"Mix" = 10​

}
​

Effect: "Chorus St" (Modulation / Sfx), active - "yes"
{

"Speed" = 2.0​

"Depth" = 10​

"Center" = 4.0​

"Mix" = 40​

}
​

Note: You will need to download and install the ToneLib-GFX software to use the preset.