JCM 800 + MESA

Discussion in 'ToneLib-GFX presets' started by Summers, Jul 8, 2023.

  1. Summers

    Summers Member

    JCM 800 + MESA​

    Preset name: just another mesa

    Comments:
    HEAVY

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 66​
    "Mode" = Hard​
    }
    ​

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {
    "Sense" = 34​
    "Level" = 50​
    }
    ​

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 0​
    "Tone" = 100​
    "Level" = 100​
    }
    ​

    Effect: "Auto Wah" (Dynamics / Filter), active - "no"
    {
    "Sense" = 55​
    "Polarity" = Up​
    "Attack" = 35​
    "Style" = V848​
    }
    ​

    Effect: "Metal DS" (Overdrive / Distortion), active - "yes"
    {
    "Dist" = 47​
    "Bass" = 56​
    "Middle" = 60​
    "Treble" = 46​
    "Level" = 57​
    }
    ​

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off​
    "A-Pan" = -25​
    "A-Level" = 51​
    "B-Bypass" = Off​
    "B-Pan" = 25​
    "B-Level" = 50​
    "Width" = 0​

    'A' branch:
    {

    Effect: "Ms JCM800" (Amp simulators), active - "yes"
    {
    "Gain" = 81​
    "Bass" = 48​
    "Middle" = 69​
    "Treble" = 70​
    "Presence" = 67​
    "Master" = 69​
    "Level (dB)" = 4​
    }
    ​

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = Mesa 4x12 SPKR 1 position 2​
    "Low Cut (Hz)" = 45​
    "Hi Cut (kHz)" = 20.0​
    "Mix" = 100​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Chorus St" (Modulation / Sfx), active - "no"
    {
    "Speed" = 1.9​
    "Depth" = 31​
    "Center" = 4.4​
    "Mix" = 29​
    }
    ​
    }
    'B' branch:
    {

    Effect: "Mesa Rect" (Amp simulators), active - "yes"
    {
    "Gain" = 66​
    "Bass" = 38​
    "Middle" = 0​
    "Treble" = 65​
    "Presence" = 70​
    "Master" = 77​
    "Level (dB)" = 4​
    }
    ​

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = Mesa 4x12 SPKR 1 position 2​
    "Low Cut (Hz)" = 54​
    "Hi Cut (kHz)" = 20.0​
    "Mix" = 100​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Chorus St" (Modulation / Sfx), active - "no"
    {
    "Speed" = 1.9​
    "Depth" = 31​
    "Center" = 4.4​
    "Mix" = 29​
    }
    ​
    }
    ​
    }
    ​

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {
    "160 Hz" = -1​
    "400 Hz" = -1​
    "800 Hz" = 2​
    "1.6 kHz" = 1​
    "3.2 kHz" = 2​
    "6.4 kHz" = -1​
    "12 kHz" = 0​
    "Level (dB)" = 0​
    }
    ​

    Effect: "Vib Delay" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 4.2​
    "Depth" = 16​
    "Feedback" = 27​
    "Time" = 5.7​
    "Mix" = 36​
    "Mode" = 0​
    }
    ​

    Effect: "ModDly" (Delay), active - "no"
    {
    "Time" = 375​
    "Feedback" = 52​
    "Tone" = 70​
    "Speed" = 1.9​
    "Mix" = 44​
    }
    ​

    Effect: "Room Rvb" (Reverberation), active - "yes"
    {
    "Time" = 4.5​
    "PreDelay" = 0​
    "LoDamp" = 46​
    "HiDamp" = 25​
    "Mix" = 35​
    }
    ​


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    of000, jmxplg, Permafrost and 8 others like this.