KL G SYNTH 22Device: Zoom B1on Firmware: 1.21 Name on device: G SYNTH 22 Optimized for: Phones/Speaker Effects chain: Patch comments: Hard to play, but can be good. Spoiler: Patch settings Effect: "Ba Synth" (Modulation / Sfx), active - "yes" "Decay" = 100 "Wave" = PWM "Reso" = 4 "Synth" = 100 "Dry" = 18 "Level" = 101 Effect: "Limiter" (Dynamics / Filter), active - "yes" "THRSH" = 5 "Ratio" = 9 "Level" = 90 "REL" = 3 Effect: "MojoRolle" (Modulation / Sfx), active - "yes" "Depth" = 45 "Speed" = 58 "Rise" = 60 "Mode" = Up-Dn "Level" = 100 Effect: "Ba PEQ" (Dynamics / Filter), active - "yes" "Freq1" = 2.0kHz "Q1" = 1 "Gain1" = 8 "Freq2" = 250Hz "Q2" = 1 "Gain2" = 0 "Level" = 100 Effect: "ModDelay2" (Delay / Reverb), active - "yes" "Time" = 401 "F.B" = 13 "Mix" = 14 "Rate" = 17 "Level" = 100 "Depth" = 50 "Tail" = OnPatch Volume: 80 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
Sorry, i am guitarist. The best way editing for yourself from one patch. if it is close to what you want.