D'jent JCM2000 Preset name: D'jent JCM2000 Comments: I'm not a great Metal lover...but this is as close as I can get with this software by itself... Effects chain: Spoiler: Preset settings Effect: "Studio EQ" (Dynamics / Filter), active - "yes" "31 Hz" = -11"62 Hz" = 6"125 Hz" = -11"250 Hz" = -7"500 Hz" = -4"1 kHz" = -4"2 kHz" = -15"4 kHz" = -5"8 kHz" = -15"16 kHz" = -15"above 16 kHz" = 0"Level (dB)" = 6 Effect: "Cent OD" (Overdrive / Distortion), active - "yes" "Drive" = 68"Tone" = 42"Level" = 59 Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 35"Mode" = Hard Effect: "Ms JCM900" (Amp simulators), active - "yes" "Gain" = 42"Bass" = 17"Middle" = 14"Treble" = 36"Presence" = 67"Master" = 70"Output" = 50"Level (dB)" = -2 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Fender Deluxe Rev (1x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 82"Hi Cut (kHz)" = 8.0"Mix" = 100"Level (dB)" = 4 Effect: "BassEQ" (Dynamics / Filter), active - "yes" "50 Hz" = 9"120 Hz" = 0"400 Hz" = -2"500 Hz" = -2"800 Hz" = 3"4.5 kHz" = 3"10 kHz" = -13"Level (dB)" = 0 Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 40"Mode" = Hard Note: You will need to download and install the ToneLib-GFX software to use the preset.
