JCM800 Lead 80's Preset name: JCM800 Lead Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 64"Mode" = Hard Effect: "T-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 20"Tone" = 100"Level" = 100 Effect: "Ms JCM800" (Amp simulators), active - "yes" "Gain" = 66"Bass" = 65"Middle" = 62"Treble" = 64"Presence" = 58"Master" = 60"Output" = 50"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = Marshall 1960A 4x12 SM57 +1_00"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 14.0"Mix" = 100"Level (dB)" = 0 Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" "160 Hz" = 5"400 Hz" = 2"800 Hz" = 0"1.6 kHz" = 0"3.2 kHz" = 0"6.4 kHz" = -3"12 kHz" = -2"Level (dB)" = 0 Effect: "TwoTapDly" (Delay), active - "yes" "Time" = Note sync, 1/8 Triplet"Feedback" = 60"Tone" = 76"Sens" = 0"TapTime" = 5.0"Mix" = 40 Effect: "Arena Rvb" (Reverb), active - "yes" "Time" = 7.3"PreDelay" = 23"LoDamp" = 18"HiDamp" = 21"Mix" = 30 Note: You will need to download and install the ToneLib-GFX software to use the preset.
