VH Eruption Preset name: VH Old School Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 81"Mode" = Soft} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 52"Tone" = 70"Level" = 74} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 82"Middle" = 23"Treble" = 39"Presence" = 65"Master" = 78"Level (dB)" = 2} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Cab IR Sample1"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 10} Effect: "Splitter" (Dynamics / Filter), active - "yes" { "A-Bypass" = Off"A-Pan" = -42"A-Level" = 55"B-Bypass" = Off"B-Pan" = 50"B-Level" = 55 'A' branch: { Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 1x8" Small Tweed"Level (dB)" = 0} Effect: "Bi-Chorus" (Modulation / Sfx), active - "yes" { "Speed A" = 3.2"Speed B" = 4.0"Depth" = 43"Reso" = 0"Mode" = Parallel"Mix" = 56} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 40} Effect: "CrossDly" (Delay), active - "yes" { "Time" = 756"Feedback" = 27"Tone" = 57"Sens" = 29"Mix" = 34} } 'B' branch: { Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" 1960 T75"Level (dB)" = 7} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 257"Feedback" = 38"Tone" = 65"LoDamp" = 19"Mix" = 65} Effect: "Flanger" (Modulation / Sfx), active - "yes" { "Speed" = 0.8"Depth" = 71"Reso" = 35"Center" = 7.7"Offset" = 0.0"Mix" = 57"Reset" = On} Effect: "DuoPhase" (Modulation / Sfx), active - "yes" { "Speed A" = 4.1"Speed B" = 2.1"Depth" = 76"Reso" = 15"Mode" = Parallel} } } Effect: "Garage Rvb" (Reverb), active - "yes" { "Time" = 3.3"PreDelay" = 29"LoDamp" = 0"HiDamp" = 30"Mix" = 61} Note: You will need to download and install the ToneLib-GFX software to use the preset.
