AC DC Tone Device: Zoom G1on Firmware: 1.21 Name on device: AC DC tone Optimized for: Phones/Speaker Effects chain: Patch comments: To get that Angus' Tone use a bridge hambucker with volume at 6-7 and tone pot at 3-4. For Single Coil active the paraEQ. Para obtener el rugido de Angus usa la pastilla doble bobina del puente con el volumen en 6/7 y el tono en 3/4. Si tenes pastilla simple pone el volumen en 10 y activa el paraEQ. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 6"DETCT" = GtrIn"Level" = 100 Effect: "Booster" (Overdrive / Distortion), active - "yes" "Gain" = 0"Tone" = 39"Level" = 140 Effect: "MS 1959" (Amp simulators), active - "yes" "Gain" = 100"Tube" = 71"Level" = 150"Trebl" = 50"Middl" = 50"Bass" = 50"Prese" = 50"CAB" = MS DRIVE 4x12"OUT" = LINE Effect: "ParaEQ" (Dynamics / Filter), active - "no" "Freq1" = 630Hz"Q1" = 4"Gain1" = 4"Freq2" = 20kHz"Q2" = 2"Gain2" = -12"Level" = 100 Effect: "Room" (Delay / Reverb), active - "yes" "Decay" = 23"Tone" = 8"Mix" = 16"PreD" = 5"Level" = 100"Tail" = Off Patch Volume: 100 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
