Atmospheric Conditions Device: Zoom MS-70cdr Firmware: 2.10 Name on device: Atmosfear Optimized for: Phones/Speaker Effects chain: Patch comments: Attempt to recreate the sounds of album Atomospheric Conditions by John Themis which used a Quantec Room SImulator. Spoiler: Patch settings Effect: "Chorus" (Modulation / Sfx), active - "yes" "Depth" = 70"Rate" = 6"Mix" = 40"Tone" = 2"Level" = 100 Effect: "Air" (Delay / Reverb), active - "yes" "Size" = 49"Tone" = 9"Mix" = 70"Ref" = 5"Level" = 100"Tail" = Off Effect: "A-Pan DLY" (Delay / Reverb), active - "yes" "Time" = 500"F.B" = 65"Mix" = 50"Rate" = 9"Width" = -30"Depth" = 5"Clip" = 0"Link" = D-P"Level" = 100 Effect: "ParticleR" (Delay / Reverb), active - "yes" "DWELL" = 75"GAIN" = 100"MODE" = STBL"MIX" = 55"MONO" = Off"Tail" = Off Effect: "ModDelay2" (Delay / Reverb), active - "yes" "Time" = 750"F.B" = 60"Mix" = 48"Rate" = 20"Level" = 100"Depth" = 35"Tail" = Off Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.