Bartolini BH2 and Ibanez bassDevice: Zoom B1 Four Firmware: 2.00 Name on device: EV_BH2 Optimized for: Phones/Speaker Effects chain: Patch comments: We read (and hear) that Bartolini BH2 pickups are darker and, without a bright end. I bought an Ibanez SRMS625EX-BKF (with those PickUps) and confirmed some of that. The trick is to reduce the low-mid frequencies (between 180-300Hz) with the 3-Way Mid Frequency switch = 250Hz + Mid knob = 0. Spoiler: Bass Guitar settings "Active EQ" = ON "3-Way Mid Frequency" = 250Hz "Bass" = 50 "Mid" = 0 "Treble" = 50 "Balance" = 50 "Volume" = 50 Plus, with our wonderful Zoom B1/B1X Four, we can bring more clarity, and even get more flexibility with some other effects: Spoiler: Patch settings Effect: "DYN Comp" (Dynamics), active - "yes" "Sense" = 6 "Attack" = Fast "Tone" = 25 "Volume" = 20 Effect: "RCBoost" (Overdrive / Distortion), active - "yes" "Gain" = 85 "Bass" = 15 "Treble" = 50 "Volume" = 85 Effect: "Dark Pre" (Overdrive / Distortion), active - "yes" "Bass" = 35 "L-MID" = 35 "H-MID" = 50 "Treble" = 50 "Blend" = 50 "Gain" = 15 (set to 60 for a very nice Metal sound) "VOL" = 50 "Boost" = OFF (LO) Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN "Depth" = 100 "Threshold" = 35 "Decay" = 0 Effect: "AMPG SVT" (Amp simulator), active - "yes" "Bass" = 0.0 "MID-F" = 220Hz "Middle" = -15.0 "Treble" = 0.0 "Gain" = 30 "Ultra" = BOTH "Volume" = 75 Patch Volume: 100 DSP Load: 73% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.