BellTollR

Discussion in 'Zoom G3n/G3Xn/G5n' started by Freddy Alberto Henao, Jul 19, 2020.

  1. BellTollR​

    [​IMG]​
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: BellTollR
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Metallica from whom the bell tolls , Ride the Lightning Guitarra Ritmica


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN​
    "Depth" = 100​
    "Threshold" = 48​
    "Decay" = 0​

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 70​
    "Boost" = Off​
    "Tone" = 50​
    "Volume" = 71​

    Effect: "Recti ORG" (Amp simulator), active - "yes"
    "Mode" = VNTG​
    "Bass" = 31​
    "Middle" = 50​
    "Treble" = 71​
    "Presence" = 63​
    "Gain" = 85​
    "Volume" = 31​
    "SOLO" = 4​

    Effect: "Gt GEQ" (Filter), active - "yes"
    "160 Hz" = 1.0​
    "400 Hz" = -1.0​
    "800 Hz" = -4.0​
    "3.2 kHz" = 7.0​
    "6.4 kHz" = 6.0​
    "12.0 kHz" = 6.5​
    "Volume" = 80​
    "CH SEL" = UnLATCH​
    "160 Hz" = 0.0​
    "400 Hz" = 0.0​
    "800 Hz" = 0.0​
    "3.2 kHz" = 0.0​
    "6.4 kHz" = 0.0​
    "12.0 kHz" = 12.0​
    "Volume" = 0​
    "CH SEL" = LATCH​
    "Parameter set" = A​

    Effect: "RCT4x12" (Cabinet), active - "yes"
    "MIC" = ON​
    "D57: D421" = 50​
    "Hi" = 50​
    "Lo" = 43​

    Effect: "P-P Delay" (Delay), active - "no"
    "Time" = Quarter-point​
    "F.B." = 30​
    "Mix" = 45​
    "Tail" = Off​

    Effect: "PDL Vol" (Pedal), active - "no"
    "Volume" = 100​
    "Min" = 0​
    "Max" = 100​
    "Curve" = A​

    Patch Volume: 52
    DSP Load: 49%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    benja likes this.