Boosted JCM800 2x12's edited

Boosted JCM800 2x12's edited​

Preset name: Boosted JCM800 2x12's

Spoiler: Preset settings

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"

"Sens" = 37​

"Mode" = Soft​

Effect: "Cent OD" (Overdrive / Distortion), active - "yes"

"Drive" = 52​

"Tone" = 70​

"Level" = 74​

Effect: "Ms JCM800" (Amp simulators), active - "yes"

"Gain" = 100​

"Bass" = 82​

"Middle" = 23​

"Treble" = 39​

"Presence" = 65​

"Master" = 78​

"Output" = 45​

"Level (dB)" = 0​

Effect: "IR Processor" (Dynamics / Filter), active - "no"

"IR" = V30 212 O Hi-Gn 121+57 Celestion​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

Effect: "IR Processor" (Dynamics / Filter), active - "yes"

"IR" = V30 212 O Hi-Gn All+Room Mono Celestion​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"

"160 Hz" = -1​

"400 Hz" = -4​

"800 Hz" = -3​

"1.6 kHz" = 0​

"3.2 kHz" = 0​

"6.4 kHz" = 0​

"12 kHz" = 0​

"Level (dB)" = 0​

Effect: "Room Rvb" (Reverb), active - "yes"

"Time" = 4.5​

"PreDelay" = 0​

"LoDamp" = 46​

"HiDamp" = 32​

"Mix" = 35​

Note: You will need to download and install the ToneLib-GFX software to use the preset.