Bridge of Badge Device: Zoom G1 Four Firmware: 2.00 Name on device: badge brid Optimized for: Phones/Speaker Effects chain: Patch comments: This modern lead sound uses XtasyBlue and ModDelay. Kinde georges bridge on Badge. far not complete. Improvements, corrections are welcome. I did not find Leslie speaker simulator. Spoiler: Patch settings Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 74"Boost" = Off"Tone" = 57"Volume" = 82 Effect: "XtasyBlue" (Amp simulator), active - "yes" "Bass" = 64"Middle" = 47"Treble" = 91"Presence" = 68"STRCT" = HI"Gain" = 41"Volume" = 40 Effect: "BGN4x12" (Cabinet), active - "yes" "MIC" = OFF"D57: D421" = 28"Hi" = 50"Lo" = 74 Effect: "TheVibe" (Modulation), active - "yes" "Speed" = 35"Depth" = 26"Mode" = CHORS"Volume" = 52 Effect: "ModDelay" (Delay), active - "yes" "Time" = 440"F.B." = 10"Mix" = 15"Tail" = On Patch Volume: 42 DSP Load: 78% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
