chor Device: Zoom B1 Four Firmware: 2.00 Name on device: AnalogCho Optimized for: Phones/Speaker Effects chain: Patch comments: This is the sound of a typical analog chorus. Spoiler: Patch settings Effect: "LMT-76" (Dynamics), active - "yes" "Input" = 40"Ratio" = 4:1"REL" = 24"Output" = 35 Effect: "SuperCho" (Modulation), active - "yes" "Depth" = 53"Rate" = 48"Tone" = 73"Mix" = 64 Effect: "Splitter" (Filter), active - "yes" "Frequency" = 125Hz"Lo" = 32"Hi" = 38"Volume" = 79 Effect: "AG 750" (Amp simulator), active - "yes" "Bass" = 50"Middle" = 50"Treble" = 50"Gain" = 50"Bright" = On"Deep" = Off"Volume" = 58 Patch Volume: 35 DSP Load: 51% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.