creedence Iput spell on you

Discussion in 'Zoom G3n/G3Xn/G5n' started by Danilo Martins, Feb 26, 2021.

  1. Danilo Martins

    Danilo Martins New Member

    creedence Iput spell on you​

    [​IMG]​
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: I PUT SPEL
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    solo


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN​
    "Depth" = 100​
    "Threshold" = 55​
    "Decay" = 0​

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 0​
    "Boost" = Off​
    "Tone" = 50​
    "Volume" = 77​

    Effect: "MS 800" (Amp simulator), active - "yes"
    "Input" = HI​
    "Bass" = 50​
    "Middle" = 0​
    "Treble" = 48​
    "Presence" = 57​
    "Gain" = 27​
    "Volume" = 70​
    "SOLO" = 3​

    Effect: "Gt GEQ 7" (Filter), active - "yes"
    "100 Hz" = 2.0​
    "200 Hz" = 0.0​
    "400 Hz" = -1.0​
    "800 Hz" = -1.5​
    "1.6 kHz" = -0.5​
    "3.2 kHz" = -1.0​
    "6.4 kHz" = 1.0​
    "Volume" = 88​
    "100 Hz" = 0.0​
    "200 Hz" = 0.0​
    "400 Hz" = 0.0​
    "800 Hz" = 0.0​
    "1.6 kHz" = 0.0​
    "3.2 kHz" = 0.0​
    "6.4 kHz" = 0.0​
    "Volume" = 80​
    "Parameter set" = A​

    Effect: "MS4x12" (Cabinet), active - "yes"
    "MIC" = ON​
    "D57: D421" = 50​
    "Hi" = 50​
    "Lo" = 50​

    Effect: "Room" (Reverb), active - "yes"
    "PreD" = 22​
    "Decay" = 10​
    "Mix" = 27​
    "Tail" = Off​

    Effect: "Output VP" (Pedal), active - "yes"
    ​

    Patch Volume: 120
    DSP Load: 56%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: