Crowbar tone (Fat)Preset name: Master Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 91 "Mode" = Hard} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off "A-Pan" = 65 "A-Level" = 66 "B-Bypass" = Off "B-Pan" = -65 "B-Level" = 66 "Width" = 0 'A' branch: { Effect: "Pickup Mod" (Dynamics / Filter), active - "yes" { "Mode" = Phase Out "Tone" = 50} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 24 "Tone" = 71 "Level" = 82} Effect: "Dz Herbert" (Amp simulators), active - "yes" { "Gain" = 50 "Bass" = 50 "Middle" = 0 "Treble" = 73 "Presence" = 50 "Master" = 50 "Level (dB)" = 7} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Puppet_IR "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0 "62 Hz" = 0 "125 Hz" = 0 "250 Hz" = -5 "500 Hz" = -12 "1 kHz" = -5 "2 kHz" = 5 "4 kHz" = 3 "8 kHz" = 3 "16 kHz" = 0 "Level (dB)" = 0}} 'B' branch: { Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 32 "Tone" = 71 "Level" = 82} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 50 "Bass" = 50 "Middle" = 0 "Treble" = 73 "Presence" = 50 "Master" = 50 "Level (dB)" = 5} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Puppet_IR "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = 0} Effect: "PhaseShift" (Modulation / Sfx), active - "yes" { "Shift" = 55 "Mix" = 100} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0 "62 Hz" = 0 "125 Hz" = 0 "250 Hz" = -5 "500 Hz" = -12 "1 kHz" = -5 "2 kHz" = 5 "4 kHz" = 3 "8 kHz" = 3 "16 kHz" = 0 "Level (dB)" = 0}}} Effect: "ModDly" (Delay), active - "no" { "Time" = 804 "Feedback" = 10 "Tone" = 66 "Speed" = 1.7 "Mix" = 38} Effect: "Canyon Rvb" (Reverberation), active - "yes" { "Time" = 6.1 "PreDelay" = 42 "LoDamp" = 0 "HiDamp" = 32 "Mix" = 39} Note: You will need to download and install the ToneLib-GFX software to use the preset.
