CYK 96 QBB Preset name: CYK Effects chain: Spoiler: Preset settings Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -25"A-Level" = 55"B-Bypass" = Off"B-Pan" = 25"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Octave" (Modulation / Sfx), active - "yes" { "Direct" = 100"-1 Oct" = 15"-2 Oct" = 0} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 75"Mode" = Hard} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 15"Tone" = 60"Level" = 100} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 75"Bass" = 45"Middle" = 40"Treble" = 74"Presence" = 50"Master" = 63"Level (dB)" = -1} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 4"400 Hz" = 0"800 Hz" = 0"1.6 kHz" = 0"3.2 kHz" = 8"6.4 kHz" = 0"12 kHz" = 0"Level (dB)" = 0} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Bogner Ecstasy (4x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 90"Hi Cut (kHz)" = 15.0"Mix" = 100"Level (dB)" = 0} Effect: "Bi-Chorus" (Modulation / Sfx), active - "yes" { "Speed A" = 1.5"Speed B" = 1.4"Depth" = 60"Reso" = 0"Mode" = OppPhase"Mix" = 30} Effect: "Hall Rvb" (Reverberation), active - "yes" { "Time" = 6.9"PreDelay" = 0"LoDamp" = 0"HiDamp" = 17"Mix" = 22} } 'B' branch: { Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 80"Mode" = Soft} Effect: "Octave" (Modulation / Sfx), active - "yes" { "Direct" = 74"-1 Oct" = 32"-2 Oct" = 11} Effect: "Dz Herbert" (Amp simulators), active - "yes" { "Gain" = 66"Bass" = 35"Middle" = 16"Treble" = 90"Presence" = 82"Master" = 100"Level (dB)" = 2} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" 1960 T75"Level (dB)" = -2} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.
