Dopethrone bass tone

Dopethrone bass tone​

Preset name: Dopethrone Bass

Comments:
Turn tone knob on your bass almost all the way down, mute bridge pickup volume, and turn the neck pickup volume a tiny bit (THIS WAS DESIGNED FOR A JAZZ BASS)

Effects chain:

Spoiler: Preset settings

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 100​

"Mode" = Soft​

}
​

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 93​

"Mode" = Soft​

}
​

Effect: "Compressor" (Dynamics / Filter), active - "yes"
{

"Sense" = 51​

"Level" = 50​

}
​

Effect: "Fuzz Smile" (Overdrive / Distortion), active - "yes"
{

"Drive" = 26​

"Tone" = 83​

"Level" = 69​

}
​

Effect: "Bass SVT" (Amp simulators), active - "yes"
{

"Bass Ctrl" = Off​

"Midrange" = 800 Hz​

"Ultra Hi" = Off​

"Bass" = 2​

"Middle" = 1​

"Treble" = 5​

"Volume" = 50​

"Level (dB)" = 0​

}
​

Effect: "Bass IRs Cab" (Cabinets), active - "yes"
{

"Model" = Markbass combo (1x12")​

"Mic Position" = Middle​

"Mic Distance" = Far​

"Low Cut (Hz)" = 0​

"Hi Cut (kHz)" = 20.0​

"Mix" = 100​

"Level (dB)" = 0​

}
​

Note: You will need to download and install the ToneLib-GFX software to use the preset.