Factory G3n [029]: ZepDrive

Discussion in 'Zoom G3n/G3Xn/G5n' started by Tonelib, May 20, 2018.

  1. Tonelib

    Tonelib Administrator

    Factory G3n [029]: ZepDrive

    [​IMG]
    Device: Zoom G3n
    Firmware: 2.00

    Name on device: ZepDrive
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This was created with the sound of Led Zeppelin's Heartbreaker in mind.


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 100
    "Threshold" = 26
    "Decay" = 30

    Effect: "MS 800" (Amp simulator), active - "yes"
    "Input" = HI
    "Bass" = 20
    "Middle" = 79
    "Treble" = 63
    "Presence" = 0
    "Gain" = 68
    "Volume" = 67
    "SOLO" = 3

    Effect: "MS4x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 50
    "Hi" = 50
    "Lo" = 28

    Effect: "St Gt GEQ" (Filter), active - "yes"
    "160 Hz" = -2.0
    "400 Hz" = -1.0
    "800 Hz" = 6.0
    "3.2 kHz" = 2.0
    "6.4 kHz" = -7.5
    "12.0 kHz" = -12.0
    "Volume" = 90
    "160 Hz" = 0.0
    "400 Hz" = 0.0
    "800 Hz" = 0.0
    "3.2 kHz" = 0.0
    "6.4 kHz" = 0.0
    "12.0 kHz" = 0.0
    "Volume" = 80
    "CH SEL" = LATCH
    "Parameter set" = A

    Effect: "Air" (Reverb), active - "yes"
    "Size" = 100
    "REF" = 10
    "Mix" = 43
    "Tail" = On

    Patch Volume: 100
    DSP Load: 61%


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files: