Fat Lead on MS JCM2000

Discussion in 'ToneLib-GFX presets' started by Arcanum, Nov 2, 2019.

  1. Arcanum

    Arcanum New Member

    Fat Lead on MS JCM2000
    Preset name: Fat Lead

    Comments:
    Cuts through the mix.

    Effects chain:
    [​IMG]

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    "Sens" = 40
    "Mode" = Hard

    Effect: "Super OD" (Overdrive / Distortion), active - "yes"
    "Drive" = 20
    "Tone" = 30
    "Level" = 64

    Effect: "Ms JCM2000" (Amp simulators), active - "yes"
    "Gain" = 15
    "Bass" = 70
    "Middle" = 60
    "Treble" = 74
    "Presence" = 62
    "Master" = 100
    "Output" = 50
    "Level (dB)" = 0

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    "Model" = Marshall JCM2000 (4x12")
    "Mic Position" = Center
    "Mic Distance" = Near
    "Low Cut (Hz)" = 60
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0

    Effect: "Plate Rvb" (Reverb), active - "yes"
    "Time" = 5.5
    "PreDelay" = 30
    "LoDamp" = 17
    "HiDamp" = 25
    "Mix" = 40

    Effect: "Chorus St" (Modulation / Sfx), active - "no"
    "Speed" = 1.9
    "Depth" = 31
    "Center" = 4.4
    "Mix" = 32

    Effect: "StereoDly" (Delay), active - "yes"
    "Time" = Note sync, 1/8 Dotted
    "Feedback" = 44
    "Tone" = 76
    "Sens" = 0
    "Mix" = 51


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Last edited: Nov 2, 2019