Fd Twin + chorus + flanger Preset name: Fender twin + Reverb + chorus + flanger Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 50"Mode" = Hard Effect: "Cent OD" (Overdrive / Distortion), active - "yes" "Drive" = 20"Tone" = 75"Level" = 70 Effect: "Bi-Chorus" (Modulation / Sfx), active - "yes" "Speed A" = 3.0"Speed B" = 5.0"Depth" = 50"Reso" = 30"Mode" = OppPhase"Mix" = 50 Effect: "Fd Twin" (Amp simulators), active - "yes" "Gain" = 50"Bass" = 50"Middle" = 50"Treble" = 50"Presence" = 50"Master" = 80"Output" = 50"Level (dB)" = 0 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Hiwatt Fane (4x12")"Mic Position" = Middle"Mic Distance" = Middle"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 2 Effect: "MultiHeadDly" (Delay), active - "yes" "Time" = Note sync, 1/4"Feedback" = 60"Tone" = 60"MODE" = Rhythm X-0-X-X"Mix" = 60 Effect: "HD Hall Rvb" (Reverb), active - "yes" "Time" = 7.7"PreLPF" = 50"PreDelay" = 250"HiDamp" = 27"LoGain" = 3.0"Mix" = 50 Effect: "Flanger" (Modulation / Sfx), active - "yes" "Speed" = 1.6"Depth" = 71"Reso" = 35"Center" = 7.7"Offset" = 0.0"Mix" = 75"Reset" = On Note: You will need to download and install the ToneLib-GFX software to use the preset.
