Fuzz search Preset name: fuzzpsy Comments: 2 hum or 1 single neck Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 58"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 21"Level" = 50} Effect: "R-Dist" (Overdrive / Distortion), active - "no" { "Drive" = 5"Tone" = 56"Level" = 100} Effect: "T-Scream" (Overdrive / Distortion), active - "no" { "Drive" = 4"Tone" = 52"Level" = 100} Effect: "Fuzz Smile" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 100} Effect: "Filtron" (Modulation / Sfx), active - "yes" { "Attack" = 2.8"Depth" = 40"Reso" = 30"Cutoff" = 1.5"Polarity" = Up"Sens" = 50} Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 70"Bass" = 66"Middle" = 40"Treble" = 70"Presence" = 50"Master" = 50"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = IONIC3"Low Cut (Hz)" = 100"Hi Cut (kHz)" = 10.0"Mix" = 100"Level (dB)" = 3} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -15"62 Hz" = -15"125 Hz" = 3"250 Hz" = 0"500 Hz" = -5"1 kHz" = -3"2 kHz" = 4"4 kHz" = 0"8 kHz" = 0"16 kHz" = -15"Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.
