General Purpose Crunch Tone

Discussion in 'Zoom G3n/G3Xn/G5n' started by StratoRabbit, May 20, 2018.

  1. StratoRabbit

    StratoRabbit New Member

    General Purpose Crunch Tone​

    [​IMG]​
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: CrunchTone
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    A good general purpose crunch tone for 60s rock type sounds.


    Effect: "SweetDrv" (Overdrive / Distortion), active - "yes"
    "Gain" = 34​
    "Tone" = 49​
    "Focus" = 89​
    "Volume" = 67​

    Effect: "FD B-MAN" (Amp simulator), active - "yes"
    "Input" = BRIGHT​
    "Bass" = 37​
    "Middle" = 95​
    "Treble" = 60​
    "Presence" = 70​
    "Gain" = 53​
    "Volume" = 79​
    "SOLO" = 3​

    Effect: "FD-B4x10" (Cabinet), active - "yes"
    "MIC" = ON​
    "D57: D421" = 50​
    "Hi" = 50​
    "Lo" = 50​

    Effect: "Gt GEQ" (Filter), active - "yes"
    "160 Hz" = 2.5​
    "400 Hz" = -1.0​
    "800 Hz" = 1.5​
    "3.2 kHz" = -1.5​
    "6.4 kHz" = 1.0​
    "12.0 kHz" = 2.5​
    "Volume" = 80​
    "160 Hz" = 0.0​
    "400 Hz" = 0.0​
    "800 Hz" = 0.0​
    "3.2 kHz" = 0.0​
    "6.4 kHz" = 0.0​
    "12.0 kHz" = 0.0​
    "Volume" = 80​
    "CH SEL" = LATCH​
    "Parameter set" = A​

    Effect: "Spring" (Reverb), active - "yes"
    "PreD" = 4​
    "Decay" = 18​
    "Mix" = 18​
    "Tail" = Off​

    Patch Volume: 50
    DSP Load: 82%


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    Judas James and Stuart Fox like this.