Ghost - From the Pinnacle to the Pit (Bass Guitar)

Ghost - From the Pinnacle to the Pit (Bass Guitar)​

Preset name: Ghost - From the Pinnacle to the Pit (Bass)

Effects chain:

Spoiler: Preset settings

Effect: "Pickup Mod" (Dynamics / Filter), active - "yes"
{

"Mode" = Humbacker->Single​

"Tone" = 20​

}
​

Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
{

"Sens" = 80​

"Mode" = Hard​

}
​

Effect: "Compressor" (Dynamics / Filter), active - "yes"
{

"Sense" = 65​

"Level" = 54​

}
​

Effect: "Splitter" (Dynamics / Filter)
{

"A-Bypass" = Off​

"A-Pan" = 0​

"A-Level" = 86​

"B-Bypass" = Off​

"B-Pan" = 0​

"B-Level" = 94​

"Width" = 0​

'A' branch:
{

Effect: "B-Scream" (Overdrive / Distortion), active - "yes"
{

"Drive" = 88​

"Tone" = 74​

"Level" = 50​

}
​

Effect: "Ms Plexi" (Amp simulators), active - "yes"
{

"Gain" = 47​

"Bass" = 45​

"Middle" = 50​

"Treble" = 49​

"Presence" = 48​

"Master" = 100​

"Level (dB)" = -5​

}
​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = -15​

"62 Hz" = -10​

"125 Hz" = -5​

"250 Hz" = -1​

"500 Hz" = -8​

"1 kHz" = -5​

"2 kHz" = 2​

"4 kHz" = -1​

"8 kHz" = -5​

"16 kHz" = -8​

"Level (dB)" = 0​

}
​

Effect: "Guitar Cab HD" (Cabinets), active - "yes"
{

"Model" = Peavey 5150 (4x12")​

"Mic Model" = Dynamic SM57​

"Mic Position" = Middle​

"Mic Distance" = Near​

"Low Cut (Hz)" = 90​

"Hi Cut (kHz)" = 12.0​

"Mix" = 100​

"Level (dB)" = 0​

}
​

Effect: "RingMod" (Modulation / Sfx), active - "yes"
{

"Direct" = 80​

"Effect" = 30​

"Cutoff" = 2.0​

"Osc" = 1.0​

}
​

}
'B' branch:
{

Effect: "Bass Drive" (Overdrive / Distortion), active - "yes"
{

"Drive" = 0​

"Blend" = 0​

"Presence" = 45​

"Bass" = 68​

"Middle" = 45​

"Treble" = 35​

"Level" = 50​

}
​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = 6​

"62 Hz" = 5​

"125 Hz" = 10​

"250 Hz" = 11​

"500 Hz" = -4​

"1 kHz" = -8​

"2 kHz" = -12​

"4 kHz" = -15​

"8 kHz" = -15​

"16 kHz" = -15​

"Level (dB)" = 0​

}
​

}
​

}
​

Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
{

"31 Hz" = -2​

"62 Hz" = 1​

"125 Hz" = 0​

"250 Hz" = 1​

"500 Hz" = -4​

"1 kHz" = -5​

"2 kHz" = 0​

"4 kHz" = -3​

"8 kHz" = -6​

"16 kHz" = -8​

"Level (dB)" = 2​

}
​

Effect: "Chorus St" (Modulation / Sfx), active - "yes"
{

"Speed" = 1.0​

"Depth" = 50​

"Center" = 1.0​

"Mix" = 24​

}
​

Effect: "Flanger" (Modulation / Sfx), active - "yes"
{

"Speed" = 1.2​

"Depth" = 12​

"Reso" = 0​

"Center" = 2.0​

"Offset" = 5.0​

"Mix" = 25​

"Reset" = Off​

}
​

Effect: "Chamber Rvb" (Reverberation), active - "yes"
{

"Time" = 1.3​

"PreDelay" = 25​

"LoDamp" = 35​

"HiDamp" = 28​

"Mix" = 6​

}
​

Note: You will need to download and install the ToneLib-GFX software to use the preset.