JCM 800 Boosted ===Preset name: JCM 800 Comments: xz Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 52 "Mode" = Soft} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 22 "Tone" = 100 "Level" = 100} Effect: "Metal DS" (Overdrive / Distortion), active - "yes" { "Dist" = 20 "Bass" = 74 "Middle" = 60 "Treble" = 46 "Level" = 57} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 70 "Bass" = 50 "Middle" = 50 "Treble" = 50 "Presence" = 50 "Master" = 50 "Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = OH 412 MRBW M75-GNR 57a Cap "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = 5} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 316 "Feedback" = 38 "Tone" = 65 "LoDamp" = 19 "Mix" = 25} Effect: "HD Room Rvb" (Reverberation), active - "yes" { "Time" = 6.6 "PreLPF" = 77 "PreDelay" = 60 "HiDamp" = 65 "LoGain" = -3.5 "Mix" = 33} Effect: "Studio EQ" (Dynamics / Filter), active - "no" { "31 Hz" = 0 "62 Hz" = 0 "125 Hz" = 0 "250 Hz" = 0 "500 Hz" = 0 "1 kHz" = 0 "2 kHz" = 0 "4 kHz" = 0 "8 kHz" = 5 "16 kHz" = 5 "Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.
