JCM800 LD Device: Zoom G1 Four Firmware: 2.00 Name on device: JCM800 LD Optimized for: Phones/Speaker Effects chain: Patch comments: JCM800 LD Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 50"Threshold" = 30"Decay" = 0 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 0"Boost" = On"Tone" = 49"Volume" = 80 Effect: "MS 800" (Amp simulator), active - "yes" "Input" = HI"Bass" = 50"Middle" = 50"Treble" = 50"Presence" = 30"Gain" = 70"Volume" = 66 Effect: "MS4x12GB" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 0"Hi" = 50"Lo" = 50 Effect: "Delay" (Delay), active - "yes" "Time" = 620"F.B." = 25"Mix" = 42"Tail" = Off Patch Volume: 100 DSP Load: 67% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
