Marshall Plexi 1959 - Drive (Guv'nor+Flanger ADA)

Discussion in 'Zoom G1on/G1Xon' started by Marcel Andrade, Dec 23, 2020.

  1. Marshall Plexi 1959 - Drive (Guv'nor+Flanger ADA)​

    [​IMG]​
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: PLEXI-FLGR
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    Simulação Marshall Plexi 1959 - Drive (Guv'nor+Flanger ADA)
    Guitarra modelo Les Paul.
    Captadores Seymour Duncan Alnico II Pro Slash.
    -----------------------------------------------------
    Configuração AMP Fisico.
    BASS 50% - MID 55% - TREBLE 55% - GAIN 10%
    -----------------------------------------------------
    FLANGER CONTROLADO PELO PEDAL 0% - 50% MIX-FLANGER


    Effect: "Governor" (Overdrive / Distortion), active - "yes"
    "Gain" = 70​
    "Tone" = 50​
    "Level" = 30​

    Effect: "MS 1959" (Amp simulators), active - "yes"
    "Gain" = 80​
    "Tube" = 40​
    "Level" = 35​
    "Trebl" = 70​
    "Middl" = 60​
    "Bass" = 20​
    "Prese" = 50​
    "CAB" = MS 1959 4x12​
    "OUT" = STACK POWER AMP​

    Effect: "Flanger" (Modulation / Sfx), active - "yes"
    "Depth" = 47​
    "Rate" = 7​
    "Reso" = 3​
    "PreD" = 4​
    "Mix" = 50​
    "Level" = 70​

    Effect: "Delay" (Delay / Reverb), active - "yes"
    "Time" = 340​
    "F.B" = 30​
    "Mix" = 40​
    "HiDMP" = 10​
    "P-P" = MONO​
    "Level" = 100​
    "Tail" = On​

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: