Marshall Plexi 1959 - SOLO (MS Guv'Nor)

Discussion in 'Zoom G1on/G1Xon' started by Marcel Andrade, Dec 23, 2020.

  1. Marshall Plexi 1959 - SOLO (MS Guv'Nor)

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: PLEXI-SOLO
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    Simulação Marshall Plexi 1959 - SOLO (MS Guv'Nor)
    Guitarra modelo Les Paul.
    Captadores Seymour Duncan Alnico II Pro Slash.
    -----------------------------------------------------
    Configuração AMP Fisico.
    BASS 50% - MID 55% - TREBLE 55% - GAIN 10%


    Effect: "PedalCry" (Pedal), active - "no"
    "Freq" = 16
    "DryMX" = 0
    "Level" = 100

    Effect: "Governor" (Overdrive / Distortion), active - "yes"
    "Gain" = 70
    "Tone" = 50
    "Level" = 55

    Effect: "MS 1959" (Amp simulators), active - "yes"
    "Gain" = 80
    "Tube" = 40
    "Level" = 35
    "Trebl" = 70
    "Middl" = 60
    "Bass" = 20
    "Prese" = 60
    "CAB" = MS 1959 4x12
    "OUT" = STACK POWER AMP

    Effect: "Delay" (Delay / Reverb), active - "yes"
    "Time" = 340
    "F.B" = 30
    "Mix" = 40
    "HiDMP" = 10
    "P-P" = MONO
    "Level" = 100
    "Tail" = On

    Effect: "Hall" (Delay / Reverb), active - "yes"
    "Decay" = 18
    "Tone" = 10
    "Mix" = 38
    "PreD" = 49
    "Level" = 100
    "Tail" = Off

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: