Mathcore Preset name: math Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 72"Mode" = Hard} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 33"Tone" = 32"Level" = 71} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -4"62 Hz" = -1"125 Hz" = -4"250 Hz" = 3"500 Hz" = 5"1 kHz" = 4"2 kHz" = -1"4 kHz" = 1"8 kHz" = 3"16 kHz" = 0"Level (dB)" = 0} Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 67"Bass" = 82"Middle" = 40"Treble" = 73"Presence" = 82"Master" = 66"Level (dB)" = 0} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 0"400 Hz" = 0"800 Hz" = 0"1.6 kHz" = 0"3.2 kHz" = 0"6.4 kHz" = -2"12 kHz" = -3"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -8"62 Hz" = 0"125 Hz" = 3"250 Hz" = 1"500 Hz" = 0"1 kHz" = 0"2 kHz" = -2"4 kHz" = 1"8 kHz" = -2"16 kHz" = 0"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = BD_CL_Telocastme"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -2"62 Hz" = 2"125 Hz" = -1"250 Hz" = -3"500 Hz" = -2"1 kHz" = -5"2 kHz" = -4"4 kHz" = 0"8 kHz" = 1"16 kHz" = 0"Level (dB)" = 6} Effect: "Chorus St" (Modulation / Sfx), active - "no" { "Speed" = 0.1"Depth" = 31"Center" = 1.0"Mix" = 100} Note: You will need to download and install the ToneLib-GFX software to use the preset.
