Megadeth Tone Preset name: Megadeth Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 100"Tone" = 100"Level" = 91} Effect: "Ms JCM900" (Amp simulators), active - "yes" { "Gain" = 90"Bass" = 78"Middle" = 41"Treble" = 79"Presence" = 88"Master" = 100"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = F.O.M MASTER"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 3"400 Hz" = -1"800 Hz" = -2"1.6 kHz" = -3"3.2 kHz" = 2"6.4 kHz" = -2"12 kHz" = 1"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 2.8"Depth" = 58"Center" = 6.1"Mix" = 73} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 350"Feedback" = 68"Tone" = 100"LoDamp" = 55"Mix" = 20} Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 8.7"PreDelay" = 32"LoDamp" = 100"HiDamp" = 22"Mix" = 62} Note: You will need to download and install the ToneLib-GFX software to use the preset.