metull Preset name: metull Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 34"Level" = 64} Effect: "Metal DS" (Overdrive / Distortion), active - "yes" { "Dist" = 6"Bass" = 74"Middle" = 77"Treble" = 30"Level" = 71} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 7"Tone" = 66"Level" = 99} Effect: "Mesa Rect" (Amp simulators), active - "yes" { "Gain" = 63"Bass" = 57"Middle" = 74"Treble" = 66"Presence" = 70"Master" = 68"Level (dB)" = 2} Effect: "Bounce Rvb" (Reverberation), active - "yes" { "Time" = 1.6"PreDelay" = 8"LoDamp" = 13"HiDamp" = 12"Mix" = 18} Effect: "Guitar IRs Cab" (Cabinets), active - "yes" { "Model" = Orange PPC (4x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 27"Hi Cut (kHz)" = 4.5"Mix" = 88"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = 04_SUNN200s_cone_e906"Low Cut (Hz)" = 31"Hi Cut (kHz)" = 6.0"Mix" = 35"Level (dB)" = 1} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 1.3"Depth" = 11"Center" = 3.0"Mix" = 23} Note: You will need to download and install the ToneLib-GFX software to use the preset.
