MS Dist

Discussion in 'Zoom G1/G1X Four' started by Robson Alves, Feb 20, 2021.

  1. Robson Alves

    Robson Alves New Member

    MS Dist​

    [​IMG]​
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: MS Dist
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Patch created using a Les Paul, playing with bridge pickup.


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN​
    "Depth" = 100​
    "Threshold" = 30​
    "Decay" = 0​

    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 55​
    "Boost" = Off​
    "Tone" = 65​
    "Volume" = 60​

    Effect: "MS 800" (Amp simulator), active - "yes"
    "Input" = HI​
    "Bass" = 50​
    "Middle" = 70​
    "Treble" = 50​
    "Presence" = 5​
    "Gain" = 70​
    "Volume" = 65​

    Effect: "MS4x12" (Cabinet), active - "yes"
    "MIC" = ON​
    "D57: D421" = 50​
    "Hi" = 40​
    "Lo" = 50​

    Effect: "Plate" (Reverb), active - "yes"
    "PreD" = 6​
    "Decay" = 28​
    "Mix" = 18​
    "Tail" = Off​

    Patch Volume: 100
    DSP Load: 81%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    dioszegia likes this.
  2. omegaprime

    omegaprime New Member

    are these both the same files