Dynamic TonePreset name. Dynamic Tone Comments: Funciona bien para Blues, Pop y Rock. Activa y desactiva los OD según tus necesidades y juega con el tono y volumen de tu guitarra. Effects chain: Spoiler: Preset settings Effect: "Cent OD" (Overdrive / Distorsión), active - "yes" { "Drive" = 26 "Tone" = 60 "Level" = 100} Effect: "Cent OD" (Overdrive / Distorsión), active - "no" { "Drive" = 70 "Tone" = 44 "Level" = 87} Effect: "Jc Clean" (Simuladores de amplificador), active - "yes" { "Gain" = 35 "Bass" = 55 "Middle" = 50 "Treble" = 55 "Presence" = 56 "Master" = 93 "Level (dB)" = 0} Effect: "Studio EQ" (Dinámica / Filtro), active - "yes" { "31 Hz" = 3 "62 Hz" = 4 "125 Hz" = 3 "250 Hz" = 2 "500 Hz" = 0 "1 kHz" = 0 "2 kHz" = 0 "4 kHz" = -3 "8 kHz" = 0 "16 kHz" = 0 "Level (dB)" = 0} Effect: "GuitarEQ" (Dinámica / Filtro), active - "yes" { "160 Hz" = 3 "400 Hz" = -3 "800 Hz" = 0 "1.6 kHz" = 3 "3.2 kHz" = -2 "6.4 kHz" = 0 "12 kHz" = -3 "Level (dB)" = 0} Effect: "Vib Delay" (Modulación / Sfx), active - "yes" { "Speed" = 0.1 "Depth" = 0 "Feedback" = 0 "Time" = 2.5 "Mix" = 15 "Mode" = 2} Effect: "Splitter" (Dinámica / Filtro) { "A-Bypass" = Off "A-Pan" = 50 "A-Level" = 55 "B-Bypass" = Off "B-Pan" = -50 "B-Level" = 55 "Width" = 100 'A' branch: { Effect: "IR Processor" (Gabinetes), active - "yes" { "IR" = 1x12 Linear SM57 ET65 "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = -5}} 'B' branch: { Effect: "IR Processor" (Gabinetes), active - "yes" { "IR" = MATCH 25 R121+906 "Low Cut (Hz)" = 0 "Hi Cut (kHz)" = 20.0 "Mix" = 100 "Level (dB)" = -6}}} Effect: "Bounce Rvb" (Reverberación), active - "yes" { "Time" = 6.0 "PreDelay" = 0 "LoDamp" = 16 "HiDamp" = 26 "Mix" = 42} Effect: "Chamber Rvb" (Reverberación), active - "yes" { "Time" = 5.0 "PreDelay" = 0 "LoDamp" = 30 "HiDamp" = 10 "Mix" = 30} Note: You will need to download and install the ToneLib-GFX software to use the preset.
