ObZen 2.0 Preset name: Obzen Comments: worked on it more, still continuing Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 90"Mode" = Hard} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 38"Tone" = 76"Level" = 96} Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 32"Middle" = 11"Treble" = 16"Presence" = 21"Master" = 70"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = obZen"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "yes" { "Speed" = 0.4"Depth" = 0"Center" = 6.3"Mix" = 100} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 1"125 Hz" = -1"250 Hz" = -4"500 Hz" = -9"1 kHz" = -10"2 kHz" = -1"4 kHz" = 3"8 kHz" = 5"16 kHz" = 1"Level (dB)" = 3} Note: You will need to download and install the ToneLib-GFX software to use the preset.
