ObZen FINAL Preset name: Obzen Comments: do NOT epxect this to sond good non mixed. this is a tone that needs the rest of the band to sound good. trust me when i say if you quad track this it will sound nearly identical Effects chain: Spoiler: Preset settings Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 61"Level" = 50} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 96"Mode" = Hard} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 49"Tone" = 20"Level" = 70} Effect: "Slo 100" (Amp simulators), active - "yes" { "Gain" = 100"Bass" = 25"Middle" = 0"Treble" = 59"Presence" = 66"Master" = 70"Level (dB)" = 0} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 0"125 Hz" = 0"250 Hz" = 0"500 Hz" = 0"1 kHz" = -3"2 kHz" = -1"4 kHz" = 2"8 kHz" = 1"16 kHz" = -3"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = obZen"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} Effect: "Chorus St" (Modulation / Sfx), active - "no" { "Speed" = 0.4"Depth" = 0"Center" = 6.3"Mix" = 100} Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = -4"125 Hz" = -7"250 Hz" = -1"500 Hz" = -3"1 kHz" = -1"2 kHz" = -3"4 kHz" = 2"8 kHz" = 5"16 kHz" = -1"Level (dB)" = -4} Note: You will need to download and install the ToneLib-GFX software to use the preset.
