Pettruci sound

Discussion in 'Zoom G3n/G3Xn/G5n' started by hurricaneabel, Nov 24, 2020.

  1. hurricaneabel

    hurricaneabel Member

    Pettruci sound

    [​IMG]
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: Pettruci
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    pettruci sound


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 54
    "Threshold" = 32
    "Decay" = 0

    Effect: "BlackWah" (Pedal), active - "no"
    "Frequency" = 98
    "Range" = 72
    "Dry" = 100
    "Volume" = 81

    Effect: "TS+Boost" (Overdrive / Distortion), active - "yes"
    "Gain" = 34
    "Tone" = 50
    "Volume" = 75
    "Comp" = 1
    "Boost" = 60
    "Bass" = 40
    "Treble" = 50
    "CONNECT" = BOOST-OD

    Effect: "Recti ORG" (Amp simulator), active - "yes"
    "Mode" = MDRN
    "Bass" = 40
    "Middle" = 50
    "Treble" = 50
    "Presence" = 60
    "Gain" = 70
    "Volume" = 17
    "SOLO" = 5

    Effect: "RCT4x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 50
    "Hi" = 50
    "Lo" = 50

    Effect: "P-P Delay" (Delay), active - "no"
    "Time" = 668
    "F.B." = 30
    "Mix" = 48
    "Tail" = On

    Effect: "HD Hall" (Reverb), active - "yes"
    "PreD" = 200
    "Decay" = 44
    "Mix" = 51
    "Tail" = Off

    Patch Volume: 42
    DSP Load: 66%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: