Rush/Alex Lifeson - 2112

Discussion in 'Zoom G3n/G3Xn/G5n' started by sabalon, Jun 3, 2018.

  1. sabalon

    sabalon New Member

    Rush/Alex Lifeson - 2112

    [​IMG]
    Device: Zoom G3Xn
    Firmware: 2.00

    Name on device: 2112
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Trying to emulate the equipment Alex used on the 2112 album as shown here http://rush.wikia.com/wiki/Alex_Lifeson_equipment
    Tape Echo is used for drive, and can also be turned on for the echo at the start of 2112.
    Phaser and Wah also included, though off by default.


    Effect: "BlackWah" (Pedal), active - "no"
    "Frequency" = 47
    "Range" = 100
    "Dry" = 0
    "Volume" = 80

    Effect: "Phaser" (Modulation), active - "no"
    "Color" = INV 8
    "Depth" = 100
    "Rate" = 12
    "Resonance" = 50

    Effect: "TapeEcho3" (Delay), active - "yes"
    "Gain" = 64
    "Hi" = 83
    "Lo" = 47
    "Volume" = 80
    "Time" = 316
    "F.B." = 27
    "Mix" = 47
    "REC LV" = 66
    "FS_STATE" = 0

    Effect: "FD TWNR" (Amp simulator), active - "yes"
    "Bass" = 62
    "Middle" = 85
    "Treble" = 79
    "Bright" = ON
    "Gain" = 53
    "Volume" = 85
    "Depth" = 69
    "SPEED" = Eighth

    Effect: "FD2x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 50
    "Hi" = 50
    "Lo" = 50

    Patch Volume: 100
    DSP Load: 72%


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files: