Slow Dancing In A burning Room - John Mayer

Discussion in 'Zoom G3n/G3Xn/G5n' started by Sumedh, Aug 12, 2020.

  1. Sumedh

    Sumedh New Member

    Slow Dancing In A burning Room - John Mayer​

    [​IMG]​
    Device: Zoom G5n
    Firmware: 3.00

    Name on device: SDIABR
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Slow dancing in a burning Room. I use it live, tested on my Fender Strat.


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN​
    "Depth" = 100​
    "Threshold" = 30​
    "Decay" = 0​

    Effect: "UK 30A" (Amp simulator), active - "yes"
    "Bass" = 35​
    "Treble" = 55​
    "Cut" = 40​
    "Gain" = 30​
    "Volume" = 60​
    "Depth" = 7​
    "Speed" = 50​
    "SOLO" = 6​

    Effect: "BGN4x12" (Cabinet), active - "yes"
    "MIC" = ON​
    "D57: D421" = 50​
    "Hi" = 50​
    "Lo" = 50​

    Effect: "St Gt GEQ" (Filter), active - "yes"
    "160 Hz" = 0.0​
    "400 Hz" = 0.0​
    "800 Hz" = 0.0​
    "3.2 kHz" = 0.0​
    "6.4 kHz" = 0.0​
    "12.0 kHz" = 0.0​
    "Volume" = 80​
    "CH SEL" = UnLATCH​
    "160 Hz" = 0.0​
    "400 Hz" = 0.0​
    "800 Hz" = 0.0​
    "3.2 kHz" = 0.0​
    "6.4 kHz" = 0.0​
    "12.0 kHz" = 12.0​
    "Volume" = 0​
    "CH SEL" = LATCH​
    "Parameter set" = A​

    Effect: "Hall" (Reverb), active - "yes"
    "PreD" = 50​
    "Decay" = 15​
    "Mix" = 45​
    "Tail" = Off​

    Effect: "AnalogDly" (Delay), active - "yes"
    "Time" = 365​
    "F.B." = 25​
    "Mix" = 35​
    "Tail" = On​

    Patch Volume: 100
    DSP Load: 46%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    JoseHills likes this.